Filter diameters and mounting requirements for Sony interchangeable lenses and fixed-lens cameras. Checked: 2026-10-07. No physical mounting tests have been performed.
Open the model index
RX10 III（DSC-RX10M3）
Documented specification: φ72mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Diameter after mounting 72mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Fixed high-zoom lens. Check hood use, widest focal length and filter stacking individually.
RX10 II（DSC-RX10M2）
Documented specification: φ62mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Diameter after mounting 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Fixed high-zoom lens. Check hood use, widest focal length and filter stacking individually.
RX10 IV（DSC-RX10M4）
Documented specification: φ72mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Diameter after mounting 72mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Fixed high-zoom lens. Check hood use, widest focal length and filter stacking individually.
RX10 V（DSC-RX10M5）
Documented specification: φ72mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Diameter after mounting 72mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Fixed high-zoom lens. Check hood use, widest focal length and filter stacking individually.
RX100 III（DSC-RX100M3）
Documented specification: φ52mm（via JJC RN-RX100）
- Mounting option
- Third-party adapter
- Compatibility status
- Conditional
- Adapter
- JJC RN-RX100
- Mounting method
- Adhesive ring
- Verified specification
- Ф52mm filter adapter supports six specified models
- Verification category
- Official accessory manufacturer
- Checked on
- 2026-10-06
3M adhesive mount. Check degreasing, placement and adhesion. This differs from the manufacturer's 49mm mounting option. Lens extension, retraction and wide-angle vignetting have not been tested on actual equipment.
RX100 II（DSC-RX100M2）
Documented specification: φ52mm（via JJC RN-RX100） / φ49mm（via Sony VFA-49R1）
- Mounting option
- Third-party adapter
- Compatibility status
- Conditional
- Adapter
- JJC RN-RX100
- Mounting method
- Adhesive ring
- Verified specification
- Ф52mm filter adapter supports six specified models
- Verification category
- Official accessory manufacturer
- Checked on
- 2026-10-06
3M adhesive mount. Check degreasing, placement and adhesion. This differs from the manufacturer's 49mm mounting option. Lens extension, retraction and wide-angle vignetting have not been tested on actual equipment.
- Mounting option
- Manufacturer adapter
- Compatibility status
- Conditional
- Adapter
- Sony VFA-49R1
- Mounting method
- Manufacturer adhesive filter adapter
- Verified specification
- 49mm diameter / supports RX100 and RX100 II
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
The manufacturer supports RX100 and RX100 II only. Do not reuse on RX100 III or later. Check discontinuation and stock of the manufacturer's adapter separately.
RX100 IV（DSC-RX100M4）
Documented specification: φ52mm（via JJC RN-RX100）
- Mounting option
- Third-party adapter
- Compatibility status
- Conditional
- Adapter
- JJC RN-RX100
- Mounting method
- Adhesive ring
- Verified specification
- Ф52mm filter adapter supports six specified models
- Verification category
- Official accessory manufacturer
- Checked on
- 2026-10-06
3M adhesive mount. Check degreasing, placement and adhesion. This differs from the manufacturer's 49mm mounting option. Lens extension, retraction and wide-angle vignetting have not been tested on actual equipment.
RX100 VA（DSC-RX100M5A）
Documented specification: φ52mm（via JJC RN-RX100）
- Mounting option
- Third-party adapter
- Compatibility status
- Conditional
- Adapter
- JJC RN-RX100
- Mounting method
- Adhesive ring
- Verified specification
- Ф52mm filter adapter supports six specified models
- Verification category
- Official accessory manufacturer
- Checked on
- 2026-10-06
3M adhesive mount. Check degreasing, placement and adhesion. This differs from the manufacturer's 49mm mounting option. Lens extension, retraction and wide-angle vignetting have not been tested on actual equipment.
RX100 VII（DSC-RX100M7）
Documented specification: φ52mm（via JJC RN-RX100VI）
- Mounting option
- Third-party adapter
- Compatibility status
- Conditional
- Adapter
- JJC RN-RX100VI
- Mounting method
- Adhesive ring
- Verified specification
- Ф52mm filters supported on RX100 VI / VII / ZV-1
- Verification category
- Official accessory manufacturer
- Checked on
- 2026-10-06
3M adhesive mount. Do not extend compatibility to the ZV-1 II or other models. Lens extension, retraction and wide-angle vignetting have not been tested on actual equipment.
RX100 VI（DSC-RX100M6）
Documented specification: φ52mm（via JJC RN-RX100VI）
- Mounting option
- Third-party adapter
- Compatibility status
- Conditional
- Adapter
- JJC RN-RX100VI
- Mounting method
- Adhesive ring
- Verified specification
- Ф52mm filters supported on RX100 VI / VII / ZV-1
- Verification category
- Official accessory manufacturer
- Checked on
- 2026-10-06
3M adhesive mount. Do not extend compatibility to the ZV-1 II or other models. Lens extension, retraction and wide-angle vignetting have not been tested on actual equipment.
RX100 V（DSC-RX100M5）
Documented specification: φ52mm（via JJC RN-RX100）
- Mounting option
- Third-party adapter
- Compatibility status
- Conditional
- Adapter
- JJC RN-RX100
- Mounting method
- Adhesive ring
- Verified specification
- Ф52mm filter adapter supports six specified models
- Verification category
- Official accessory manufacturer
- Checked on
- 2026-10-06
3M adhesive mount. Check degreasing, placement and adhesion. This differs from the manufacturer's 49mm mounting option. Lens extension, retraction and wide-angle vignetting have not been tested on actual equipment.
RX100（DSC-RX100）
Documented specification: φ52mm（via JJC RN-RX100） / φ49mm（via Sony VFA-49R1）
- Mounting option
- Third-party adapter
- Compatibility status
- Conditional
- Adapter
- JJC RN-RX100
- Mounting method
- Adhesive ring
- Verified specification
- Ф52mm filter adapter supports six specified models
- Verification category
- Official accessory manufacturer
- Checked on
- 2026-10-06
3M adhesive mount. Check degreasing, placement and adhesion. This differs from the manufacturer's 49mm mounting option. Lens extension, retraction and wide-angle vignetting have not been tested on actual equipment.
- Mounting option
- Manufacturer adapter
- Compatibility status
- Conditional
- Adapter
- Sony VFA-49R1
- Mounting method
- Manufacturer adhesive filter adapter
- Verified specification
- 49mm diameter / supports RX100 and RX100 II
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
The manufacturer supports RX100 and RX100 II only. Do not reuse on RX100 III or later. Check discontinuation and stock of the manufacturer's adapter separately.
RX10（DSC-RX10）
Documented specification: φ62mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Diameter after mounting 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Fixed high-zoom lens. Check hood use, widest focal length and filter stacking individually.
RX1R III（DSC-RX1RM3）
Documented specification: φ49mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49mm supported / 49mm filter diameter
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Individually check combined use of the hood, cap and filter frame.
RX1R II（DSC-RX1RM2）
Documented specification: φ49mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49mm supported / 49mm filter diameter
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Individually check combined use of the hood, cap and filter frame.
RX1R（DSC-RX1R）
Documented specification: φ49mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49mm supported / 49mm filter diameter
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Individually check combined use of the hood, cap and filter frame.
RX1（DSC-RX1）
Documented specification: φ49mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49mm supported / 49mm filter diameter
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Individually check combined use of the hood, cap and filter frame.
VLOGCAM ZV-1
Documented specification: φ52mm（via JJC RN-RX100VI）
- Mounting option
- Third-party adapter
- Compatibility status
- Conditional
- Adapter
- JJC RN-RX100VI
- Mounting method
- Adhesive ring
- Verified specification
- Ф52mm filters supported on RX100 VI / VII / ZV-1
- Verification category
- Official accessory manufacturer
- Checked on
- 2026-10-06
3M adhesive mount. Do not extend compatibility to the ZV-1 II or other models. Lens extension, retraction and wide-angle vignetting have not been tested on actual equipment.
Distagon T* FE 35mm F1.4 ZA
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 10-18mm F4 OSS
Documented specification: φ62mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 62
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 11mm F1.8
Documented specification: φ55mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 55
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 15mm F1.4 G
Documented specification: φ55mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 55
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 16-55mm F2.8 G
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 18-135mm F3.5-5.6 OSS
Documented specification: φ55mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 55
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 18-200mm F3.5-6.3 OSS LE
Documented specification: φ62mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 62
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 20mm F2.8
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 30mm F3.5 Macro
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 35mm F1.8 OSS
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 50mm F1.8 OSS
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 55-210mm F4.5-6.3 OSS
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E 70-350mm F4.5-6.3 G OSS
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E PZ 10-20mm F4 G
Documented specification: φ62mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 62
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E PZ 16-50mm F3.5-5.6 OSS
Documented specification: φ40.5mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 40.5
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E PZ 16-50mm F3.5-5.6 OSS II
Documented specification: φ40.5mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 40.5
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E PZ 18-105mm F4 G OSS
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E PZ 18-110mm F4 G OSS
Documented specification: φ95mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 95
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E PZ 18-200mm F3.5-6.3 OSS
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E16mm F2.8
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E18-200mm F3.5-6.3 OSS
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
E18-55mm F3.5-5.6 OSS
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 100-400mm F4.5 GM OSS
Documented specification: φ95mm / φ40.5mm
- Mounting option
- Sony E（Front）
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 95mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
The drop-in diameter refers to the dedicated holder's specification. Distinguish it from a front screw-in diameter and check compatibility with the dedicated holder and filter.
- Mounting option
- Sony E（Drop-in）
- Compatibility status
- Conditional
- Mounting method
- Drop-in
- Verified specification
- Filter diameter 40.5mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
The drop-in diameter refers to the dedicated holder's specification. Distinguish it from a front screw-in diameter and check compatibility with the dedicated holder and filter.
FE 100-400mm F4.5-5.6 GM OSS
Documented specification: φ77mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 77
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 100-400mm F5.6-8 OSS
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 67mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Front screw-in mounting. Official product name and specifications verified.
FE 100mm F2.8 Macro GM OSS
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 100mm F2.8 STF GM OSS
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 12-24mm F2.8 GM
Documented specification: Diameter / method needs verification
- Mounting option
- Sony E
- Compatibility status
- Conditional
- Mounting method
- Rear sheet filter
- Rear / special mounting
- Sheet
- Verified specification
- -
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Use filter template / rear holder / Do not confuse rear and front diameters or mounting methods
FE 12-24mm F4 G
Documented specification: Standard front filters not supported
- Mounting option
- Sony E
- Compatibility status
- Front screw-in mounting not supported
- Mounting method
- No front filter thread
- Verified specification
- -（Cannot be mounted）
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Check compatibility with aftermarket dedicated holders separately. “Not supported” in this table refers to front screw-in mounting.
FE 135mm F1.8 GM
Documented specification: φ82mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 82
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 14mm F1.8 GM
Documented specification: Diameter / method needs verification
- Mounting option
- Sony E
- Compatibility status
- Conditional
- Mounting method
- Rear sheet filter
- Rear / special mounting
- Sheet
- Verified specification
- -
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Use filter template / rear holder / Do not confuse rear and front diameters or mounting methods
FE 16-25mm F2.8 G
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 16-35mm F2.8 GM
Documented specification: φ82mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 82
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 16-35mm F2.8 GM II
Documented specification: φ82mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 82
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 16mm F1.8 G
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 20-70mm F4 G
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 200-600mm F5.6-6.3 G OSS
Documented specification: φ95mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 95
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 20mm F1.8 G
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 24-105mm F4 G OSS
Documented specification: φ77mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 77
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 24-240mm F3.5-6.3 OSS
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 24-50mm F2.8 G
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 24-70mm F2.8 GM
Documented specification: φ82mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 82
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 24-70mm F2.8 GM II
Documented specification: φ82mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 82
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 24mm F1.4 GM
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 24mm F2.8 G
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 28-60mm F4-5.6
Documented specification: φ40.5mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 40.5
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 28-70mm F2 GM
Documented specification: φ86mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 86
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 28-70mm F3.5-5.6 OSS
Documented specification: φ55mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 55
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 28-70mm F3.5-5.6 OSS II
Documented specification: φ55mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 55
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 28mm F2
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 300mm F2.8 GM OSS
Documented specification: φ40.5mm
- Mounting option
- Sony E（Drop-in）
- Compatibility status
- Conditional
- Mounting method
- Drop-in
- Verified specification
- Filter diameter 40.5mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
The drop-in diameter refers to the dedicated holder's specification. Distinguish it from a front screw-in diameter and check compatibility with the dedicated holder and filter.
FE 35mm F1.4 GM
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 35mm F1.8
Documented specification: φ55mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 55
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 400-800mm F6.3-8 G OSS
Documented specification: φ105mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 105
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 400mm F2.8 GM OSS
Documented specification: φ40.5mm
- Mounting option
- Sony E（Drop-in）
- Compatibility status
- Conditional
- Mounting method
- Drop-in
- Verified specification
- Filter diameter 40.5mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
The drop-in diameter refers to the dedicated holder's specification. Distinguish it from a front screw-in diameter and check compatibility with the dedicated holder and filter.
FE 400mm F4.5 GM OSS
Documented specification: φ95mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 95
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 40mm F2.5 G
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 50-150mm F2 GM
Documented specification: φ95mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 95
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 50mm F1.2 GM
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 50mm F1.4 GM
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 50mm F1.8
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 50mm F2.5 G
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 50mm F2.8 Macro
Documented specification: φ55mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 55
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 600mm F4 GM OSS
Documented specification: φ40.5mm
- Mounting option
- Sony E（Drop-in）
- Compatibility status
- Conditional
- Mounting method
- Drop-in
- Verified specification
- Filter diameter 40.5mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
The drop-in diameter refers to the dedicated holder's specification. Distinguish it from a front screw-in diameter and check compatibility with the dedicated holder and filter.
FE 600mm F6.3 GM OSS
Documented specification: φ95mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 95
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 70-200mm F2.8 GM OSS
Documented specification: φ77mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 77
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 70-200mm F2.8 GM OSS II
Documented specification: φ77mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 77
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 70-200mm F4 G OSS
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 70-200mm F4 Macro G OSS II
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 70-300mm F4.5-5.6 G OSS
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 8-14mm F3.5 Fisheye G
Documented specification: Diameter / method needs verification
- Mounting option
- Sony E
- Compatibility status
- Conditional
- Mounting method
- Rear sheet filter
- Rear / special mounting
- Sheet
- Verified specification
- -
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Use filter template / rear holder / Do not confuse rear and front diameters or mounting methods
FE 85mm F1.4 GM
Documented specification: φ77mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 77
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 85mm F1.4 GM II
Documented specification: φ77mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 77
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 85mm F1.8
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE 90mm F2.8 Macro G OSS
Documented specification: φ62mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 62
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE PZ 16-35mm F4 G
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
FE PZ 28-135mm F4 G OSS
Documented specification: φ95mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 95
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Planar T* FE 50mm F1.4 ZA
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Sonnar T* FE 35mm F2.8 ZA
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Sonnar T* FE 55mm F1.8 ZA
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 49
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Sonnar T* E 24mm F1.8 ZA
Documented specification: φ49mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 49mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Front screw-in mounting. Official product name and specifications verified.
Vario-Tessar T* FE 16-35mm F4 ZA OSS
Documented specification: φ72mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 72
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Vario-Tessar T* FE 24-70mm F4 ZA OSS
Documented specification: φ67mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- 67
- Verification category
- Official specifications verified
- Checked on
- 2026-10-06
Vario-Tessar T* E 16-70mm F4 ZA OSS
Documented specification: φ55mm
- Mounting option
- Sony E
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Front screw-in mounting. Official product name and specifications verified.
70-200mm F2.8 G SSM II（SAL70200G2）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
70-300mm F4.5-5.6 G SSM II（SAL70300G2）
Documented specification: φ62mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
70-400mm F4-5.6 G SSM II（SAL70400G2）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
35mm F1.4 G（SAL35F14G）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
300mm F2.8 G SSM II（SAL300F28G2）
Documented specification: φ42mm
- Mounting option
- Sony A
- Compatibility status
- Conditional
- Mounting method
- Dedicated drop-in
- Verified specification
- Filter diameter 42mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Uses a dedicated drop-in filter. φ42mm specifies the drop-in filter, not a front screw-in thread. Compatibility with standard 42mm filters requires separate verification.
500mm F4 G SSM（SAL500F40G）
Documented specification: φ42mm
- Mounting option
- Sony A
- Compatibility status
- Conditional
- Mounting method
- Dedicated drop-in
- Verified specification
- Filter diameter 42mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Uses a dedicated drop-in filter. φ42mm specifies the drop-in filter, not a front screw-in thread. Compatibility with standard 42mm filters requires separate verification.
Vario-Sonnar T* 16-35mm F2.8 ZA SSM II（SAL1635Z2）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
Vario-Sonnar T* 24-70mm F2.8 ZA SSM II（SAL2470Z2）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
Distagon T* 24mm F2 ZA SSM（SAL24F20Z）
Documented specification: φ72mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 72mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
Planar T* 50mm F1.4 ZA SSM（SAL50F14Z）
Documented specification: φ72mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 72mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
Planar T* 85mm F1.4 ZA（SAL85F14Z）
Documented specification: φ72mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 72mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
Sonnar T* 135mm F1.8 ZA（SAL135F18Z）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
28-75mm F2.8 SAM（SAL2875）
Documented specification: φ67mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 67mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
75-300mm F4.5-5.6（SAL75300）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
16mm F2.8 Fisheye（SAL16F28）
Documented specification: Front screw-in mounting not supported
- Mounting option
- Sony A
- Compatibility status
- Front screw-in mounting not supported
- Mounting method
- Built-in filters (4 types)
- Verified specification
- Built-in filter
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
This lens uses built-in filters. Standard front screw-in filters cannot be attached.
20mm F2.8（SAL20F28）
Documented specification: φ72mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 72mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
50mm F1.4（SAL50F14）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
85mm F2.8 SAM（SAL85F28）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
50mm F2.8 Macro（SAL50M28）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
100mm F2.8 Macro（SAL100M28）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
135mm F2.8 [T4.5] STF（SAL135F28）
Documented specification: φ72mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 72mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
Vario-Sonnar T* DT 16-80mm F3.5-4.5 ZA（SAL1680Z）
Documented specification: φ62mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 11-18mm F4.5-5.6（SAL1118）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 16-50mm F2.8 SSM（SAL1650）
Documented specification: φ72mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 72mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 16-105mm F3.5-5.6（SAL16105）
Documented specification: φ62mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 18-55mm F3.5-5.6 SAM II（SAL18552）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 18-135mm F3.5-5.6 SAM（SAL18135）
Documented specification: φ62mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 18-250mm F3.5-6.3（SAL18250）
Documented specification: φ62mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 55-200mm F4-5.6 SAM（SAL55200-2）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 55-300mm F4.5-5.6 SAM（SAL55300）
Documented specification: φ62mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 35mm F1.8 SAM（SAL35F18）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 50mm F1.8 SAM（SAL50F18）
Documented specification: φ49mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 49mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 30mm F2.8 Macro SAM（SAL30M28）
Documented specification: φ49mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 49mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
28mm F2.8（SAL28F28）
Documented specification: φ49mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 49mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
24-105mm F3.5-4.5（SAL24105）
Documented specification: φ62mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 18-70mm F3.5-5.6（SAL1870）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 18-200mm F3.5-6.3（SAL18200）
Documented specification: φ62mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
500mm F8 Reflex（SAL500F80）
Documented specification: φ42mm
- Mounting option
- Sony A
- Compatibility status
- Conditional
- Mounting method
- Dedicated drop-in
- Verified specification
- Filter diameter 42mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Uses a dedicated drop-in filter. φ42mm specifies the drop-in filter, not a front screw-in thread. Compatibility with standard 42mm filters requires separate verification.
300mm F2.8 G（SAL300F28G）
Documented specification: φ42mm
- Mounting option
- Sony A
- Compatibility status
- Conditional
- Mounting method
- Dedicated drop-in
- Verified specification
- Filter diameter 42mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Uses a dedicated drop-in filter. φ42mm specifies the drop-in filter, not a front screw-in thread. Compatibility with standard 42mm filters requires separate verification.
70-200mm F2.8 G（SAL70200G）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
70-300mm F4.5-5.6 G SSM（SAL70300G）
Documented specification: φ62mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 62mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
70-400mm F4-5.6 G SSM（SAL70400G）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
Vario-Sonnar T* 16-35mm F2.8 ZA SSM（SAL1635Z）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
Vario-Sonnar T* 24-70mm F2.8 ZA SSM（SAL2470Z）
Documented specification: φ77mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 77mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 18-55mm F3.5-5.6 SAM（SAL1855）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
DT 55-200mm F4-5.6（SAL55200）
Documented specification: φ55mm
- Mounting option
- Sony A
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
A-mount lens. Check filter-frame thickness and hood interference when mounting.
HX400V（DSC-HX400V）
Documented specification: φ55mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Front filter diameter verified in official documentation. Check frame thickness and edge intrusion when mounting.
HX300（DSC-HX300）
Documented specification: φ55mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 55mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Front filter diameter verified in official documentation. Check frame thickness and edge intrusion when mounting.
V3（DSC-V3）
Documented specification: φ58mm
- Mounting option
- Manufacturer adapter
- Compatibility status
- Conditional
- Mounting method
- Screw-in via adapter
- Verified specification
- Filter diameter 58mm
- Required adapter
- VAD-VHA
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
VAD-VHA is required. If it obstructs the optical viewfinder, compose using the LCD screen.
RX0（DSC-RX0）
Documented specification: φ30.5mm
- Mounting option
- Manufacturer adapter
- Compatibility status
- Conditional
- Mounting method
- Screw-in via adapter
- Verified specification
- Filter diameter 30.5mm
- Required adapter
- VFA-305R1
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
The diameter applies after attaching VFA-305R1. Waterproofing is not maintained with the adapter attached; do not use underwater.
RX0 II（DSC-RX0M2）
Documented specification: φ30.5mm
- Mounting option
- Manufacturer adapter
- Compatibility status
- Conditional
- Mounting method
- Screw-in via adapter
- Verified specification
- Filter diameter 30.5mm
- Required adapter
- VFA-305R1
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
The diameter applies after attaching VFA-305R1. Waterproofing is not maintained with the adapter attached; do not use underwater.
F717（DSC-F717）
Documented specification: φ58mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 58mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Front filter diameter verified in official documentation. Check frame thickness and edge intrusion when mounting.
F828（DSC-F828）
Documented specification: φ58mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 58mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
Front filter diameter verified in official documentation. Check frame thickness and edge intrusion when mounting.
H1（DSC-H1）
Documented specification: φ58mm
- Mounting option
- Manufacturer adapter
- Compatibility status
- Conditional
- Mounting method
- Screw-in via adapter
- Verified specification
- Filter diameter 58mm
- Required adapter
- Supplied adapter ring
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
This diameter applies after attaching the supplied dedicated adapter. It is not the diameter for direct screw-in mounting on the camera body.
H5（DSC-H5）
Documented specification: φ58mm
- Mounting option
- Manufacturer adapter
- Compatibility status
- Conditional
- Mounting method
- Screw-in via adapter
- Verified specification
- Filter diameter 58mm
- Required adapter
- Supplied dedicated adapter
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
This diameter applies after attaching the supplied dedicated adapter. It is not the diameter for direct screw-in mounting on the camera body.
H7（DSC-H7）
Documented specification: φ74mm
- Mounting option
- Manufacturer adapter
- Compatibility status
- Conditional
- Mounting method
- Screw-in via adapter
- Verified specification
- Filter diameter 74mm
- Required adapter
- Supplied lens adapter
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-06
This diameter applies after attaching the supplied dedicated adapter. It is not the diameter for direct screw-in mounting on the camera body.
R1（DSC-R1）
Documented specification: φ67mm
- Mounting option
- Direct mounting
- Compatibility status
- Supported
- Mounting method
- Front screw-in
- Verified specification
- Filter diameter 67mm
- Verification category
- Official camera manufacturer
- Checked on
- 2026-10-07
A 67mm filter attaches directly to the front. The VAD-RA in the official specifications is for conversion lenses and is not required for a standard 67mm filter. Check frame thickness and wide-angle intrusion when mounting.
Coverage and selection notes
We prioritize manufacturer specifications, FAQs, manuals and official distributor information. Third-party adapters are recorded only where the accessory manufacturer explicitly lists compatibility. Coverage does not include every generation, region or mount. Unconfirmed does not mean incompatible.
A matching diameter does not guarantee compatibility with a specific TOKYO GRAPHER product, freedom from vignetting or stacked-filter use. Check the exact model, generation, frame thickness, hood, widest focal length, macro operation and manufacturer restrictions such as one-filter-only use. No physical mounting tests have been performed.